TouchMix 8/16 Firmware v3.0

TouchMix Training : TouchMix 8/16 Firmware v3.0

1 ) TouchMix Introduction

2m 3s

2 ) Mixer Navigation

3m 16s

3 ) Simple vs. Advanced Mode

2m 37s

4 ) Preset Libraries

5m 39s

5 ) FX Wizard

5m 59s

6 ) Advanced Effects

4m 16s

7 ) Gain Wizard

3m 8s

8 ) Recording Functions

7m 15s

9 ) Adv. Recording & Playback

7m 15s

10 ) Updating Firmware

4m 20s

11 ) TouchMix 8/16 Firmware v3.0

4m 25s

12 ) TM-30 Pro: Overview

5m 42s

13 ) TM-30 Pro: Feedback Wizard

5m 11s

14 ) TM-30 Pro: Copy & Paste

3m 0s

15 ) TM-30 Pro: DAW

4m 44s

16 ) TM-30 Pro: RTAs

5m 46s

17 ) TM-30 Pro: Patch Matrix

5m 37s

18 ) Assessment

Video Transcript

TouchMix 8/16 Firmware v3.0 4m 25s
0:07
What do you get when you combine the incredible power and technology from the TouchMix-30 Pro
0:11
with the elegant and compact form factor of the TouchMix-8 and -16?
0:15
Introducing the brand new TouchMix Version 3.0 for the TouchMix-8 and 16.
0:20
Version 3 introduces an amazing 17 new features to the 8 and 16, making it by far the most powerful,
0:28
yet easy-to-use mixer on the planet.
0:31
Along with some of the most requested features from the TouchMix-30 Pro,
0:34
we’ve also thrown in a couple of new additional features.
0:37
Ready to learn what's new? Let's go!
0:40
Updated Graphics. The first thing that you’ll notice is that the look and feel of the TouchMix-30 Pro
0:45
graphical interface is now implemented on the TouchMix-8 and 16.
0:50
Aux Mix Select. To make navigation of the mixer even easier, Aux Mix select buttons have been added
0:55
to the left side of the screen for one-touch access for all the monitor mixes.
1:00
Channel Overview. With the new Channel Overview screen, you can see all the important settings
1:05
for a channel at once.
1:08
Feedback Wizard. Do you hate feedback? We do too. That’s why we love that the Feedback Wizard has been
1:13
added to version three. And now there is eight anti-feedback filters for every output.
1:18
Let the Wizard set them or take control yourself.
1:21
Room Tuning Wizard. Everybody loves the Room Tuning Wizard and now it’s yours on the TouchMIx-8 and 16.
1:28
Tablet Follows Mixer. OK, check this out. Whenever you select a fader on the mixer,
1:33
that channel’s settings are displayed on your tablet. Want to see channel overview? EQ?
1:39
Just select the channel and you’re there. Of course, you can turn this off and have separate controls instead,
1:44
but, way cool, right?
1:46
Additional User Buttons. While we’re on the subject of the tablet, check out the additional four User buttons
1:51
for programming your most important go-to mixer functions.
1:55
To help set your EQ, there’s a Real-Time Analyzer available on all input and output EQ displays.
2:01
There’s only one, versus the two that are on the TouchMix-30 Pro, but c’mon… you get an RTA!
2:07
Copy and Paste. Fast and easy. Copy entire channel settings, mixes, EQ or compressor and limiter settings
2:15
from one channel to another.
2:17
Output Parametric EQ. Do you prefer a parametric or a graphic EQ on your output?
2:23
Now we’ve got you covered both ways with your choice of a 6-band parametric EQ or a 1/3 octave
2:29
graphic EQ on each output.
2:31
Balanced Mono for Aux 7/8 and 9/10. Speaking of outputs, if you’ve got a TouchMix-16,
2:37
you can now configure stereo outputs seven/eight and nine/ten as balanced mono outputs.
2:44
Really handy to drive a couple more wedges.
2:46
K.2 Series Presets. The K.2 Series features presets for a wide range of applications.
2:52
TouchMix now offers the same settings right on the mixer. So you can leave your K.2 speakers set to the
2:58
default settings and recall the preset you want on your mixer.
3:02
Input Delay. Syncing to video? Doing a large venue event? You now have up to 100 ms of delay on each input.
3:12
Channel Safe. Need to make several scene changes during a show but want to protect certain channels from
3:18
being changed? Lock them down with channel safe.
3:20
MP3 File Playback. You asked for it, you got it. Just plug in a USB stick loaded with MP3 files and you’re ready
3:28
to roll with background tracks or break music.
3:31
No computer? No problem. Now the TouchMix-8 and 16 directly prepare attached USB drives for recording
3:38
and playback in the proper FAT 32 format. No 3rd party utility or computer needed.
3:44
Direct Download for Updates. Last but not at all least, once you have Version 3 installed on your TouchMix,
3:51
your mixer will check for updates whenever it’s connected to the Internet and give you the choice of updating
3:57
now or later, directly, or to a connected hard drive. Now you’ll always be equipped with the most up-to-date
4:03
TouchMix firmware available.
4:05
So, how did we do? Nice, right? You want it, right? Just go to QSC.com and download the update and it’s yours.
4:11
Did we mention that it’s FREE? What are you waiting for?
4:13
Go “Beyond Mixing” and discover everything that the new TouchMix Version 3 has to offer.
4:17
We’ll see you next time.

Lesson Description

TouchMix 8/16 Firmware v3.0 4m 25s

Introducing TouchMix V3.0 for TouchMix-8/16 digital mixers! Version 3.0 includes twenty significant enhancements, making these models far and away the most powerful and comprehensive, yet easy-to-use compact mixers available.

Downloads and Links

TouchMix 8/16 Firmware v3.0 4m 25s