FX Wizard

TouchMix Training : FX Wizard

1 ) TouchMix Introduction

2m 3s

2 ) Mixer Navigation

3m 16s

3 ) Simple vs. Advanced Mode

2m 37s

4 ) Preset Libraries

5m 39s

5 ) FX Wizard

5m 59s

6 ) Advanced Effects

4m 16s

7 ) Gain Wizard

3m 8s

8 ) Recording Functions

7m 15s

9 ) Adv. Recording & Playback

7m 15s

10 ) Updating Firmware

4m 20s

11 ) TouchMix 8/16 Firmware v3.0

4m 25s

12 ) RTAs

5m 46s

13 ) Connecting to Wi-Fi

3m 34s

14 ) Feedback Wizard

5m 11s

15 ) Copy & Paste

3m 0s

16 ) TM-30 Pro: Overview

5m 42s

17 ) TM-30 Pro: DAW

4m 44s

18 ) TM-30 Pro: Patch Matrix

5m 37s

19 ) TM-30 Pro: Custom Fader Banks

1m 58s

20 ) TM-30 Pro: External Control

7m 31s

21 ) TM-30 Pro: Auto Mixer

9m 2s

22 ) TouchMix-30 Pro: Scenes, Snapshots and Cue Lists

14m 23s

23 ) TouchMix-30 Pro Control App: Offline Editing

6m 37s

24 ) Assessment

Video Transcript

FX Wizard 5m 59s
0:07
Today we’re going to introduce you to the onboard effects processors on the TouchMix,
0:11
and show you how to use the FX Wizard to add effects to your performance.
0:15
Audio effects like reverb, chorus, delay, pitch correction and
0:19
pitch change are essential in today’s audio production.
0:23
The TouchMix may just give you more effects processing than you’ve ever had before.
0:27
But using effects can be a bit intimidating.
0:29
So stick with us, because the payoff is a professional sounding live performance.
0:34
First, let’s take a look at the architecture of the effects section. Imagine this:
0:43
Inside TouchMix is a virtual equipment warehouse. In the warehouse are 24 effects processors.
0:50
4 Chorus Processors, 4 Pitch Change Processors,
0:54
4 Dense Reverb Processors, 4 Lush Reverb Processors,
0:58
4 Mono Delay Processors, and 4 Stereo Delay Processors.
1:03
You can choose any 4 of these processors in any combination to use at any one time.
1:10
Each of these processors has multiple presets.
1:13
The reverb processors, for example, will have presets simulating various sizes of rooms
1:17
and halls as well as reverb plates.
1:20
There may also be brighter or darker sounding variations and presets with longer or shorter reverb times.
1:27
We can send the signal from any of the inputs to any effects processors.
1:31
Once the processor has done its job by adding the “wet" sound
1:35
that’s what we call the sound that’s been processed through the effect –
1:38
it can be blended back with the “dry", unaffected sound from the inputs and sent on to the mixer’s outputs.
1:44
Now that we’ve got a feel for how the effects work, let’s talk about what you’re going to use them for.
1:49
Let’s say that you have a large band with a sax player, some vocalists, and a fully-miked drum kit.
1:56
In this example, we’re going to use the factory default presets.
1:59
Don’t be afraid to use these. We designed them to be useful in a lot of different situations.
2:04
In this hypothetical band, the lead vocalist will be sent to a 250 msec.
2:08
delay that will be mixed in at a low level to provide a bit of thickening.
2:18
Horns and all the vocals will be given a bit of “space" with a Medium Hall Reverb.
2:28
The snare and toms are all going to have a Medium Plate Reverb applied to them.
2:36
Plate reverb is a go-to effect for drums in a live sound environment.
2:41
Note that you can send a channel to more than one effect.
2:44
Our sax is also being sent to a Pitch Shift effect with a Light Detune preset.
2:49
This will provide a subtle doubling.
2:55
Other instruments either don’t need any effects or have their own effects like guitar pedals
2:59
or internal effects on a keyboard, so we’re going to leave those dry.
3:03
So now you understand the TouchMix effects and you’ve thought about what to do with the effects,
3:08
let’s talk about the HOW. There are several ways to select and set up effects on the TouchMix.
3:14
Today we’re going to focus on the fastest and easiest method – which is the FX Wizard.
3:19
Much like the Channel Presets, or pretty much anything else you find on the TouchMix,
3:24
the FX Wizard is designed to help you get the most out of a live performance.
3:28
So let’s say that you need to add some reverb to a tom drum,
3:32
but you don’t know which one is the best for your scenario.
3:35
Well, the Wizard helps you out with that. Let me show you what we mean.
3:38
Start by pressing Wizard, then FX Wizard.
3:43
If this is your first time using the FX wizard, the Mixer will default to FX processor 1.
3:48
Select a Preset by choosing the Source, Type and FX Style windows to choose an effect.
3:54
You’ll notice that not all the reverb types in the TouchMix are available for selection
3:58
just the ones that are most relevant and appropriate for the selected source.
4:03
So just like the previous example where we selected a Plate reverb for the toms,
4:07
you’ll see the Plate Reverb is available for use here,
4:10
while Hall reverb, an effect that might muddy up the drums in a mix, is not. Pretty smart, right?
4:16
Use the Master Encoder to scroll up and down the list or drag on screen to see all the selections.
4:22
Touch Recall once you’ve made a choice and confirm.
4:26
The Preset Name will be displayed below the Type window.
4:29
The preset has now been loaded, and now it’s time to send audio to FX1.
4:34
On your mixer, just decide which channels you want the effect to apply to
4:38
and touch the corresponding button under “Select Inputs to Feed."
4:42
The selected channels are now feeding the effects processor.
4:46
The moment you’ve selected an input, it is automatically sent to the effects processor,
4:50
and returned again, all at a nominal level.
4:53
You don’t have to adjust anything else.
4:55
Now, is your performer going to want to hear effects in his stage monitor? If so, that’s easy to do.
5:01
Just select the buttons under “Select Aux Outputs" to tell your mixer where the effect should go.
5:07
If you find that you’d like to change the level of the effect, you can use the Master FX fader here.
5:12
You’ve still got three effects available,
5:15
so touch one of the tabs on the top of the screen to set up another effect.
5:18
And that’s it. You’ve set up all your effects.
5:22
And here’s one more tip. The TouchMix has an FX Mute button.
5:26
You can use it to mute all the effects at the same time.
5:29
This is really useful when a singer is talking between songs
5:33
and you don’t want to hear reverb and delay on speech.
5:36
We’re going to use it right now to demonstrate the difference that effects have on a mix.
5:49
That’s it for this installment. If you want to dive even further into using effects,
5:53
check out our next installment: Advanced Effects.
5:57
We’ll see you then.

Lesson Description

FX Wizard 5m 59s

If you are new to incorporating effects like reverb, chorus, delay, and pitch correction, this tutorial will show you how to call up great effects quickly using the FX Wizard.