Video Transcript
K.2: Back Panel Navigation
1m 52s
00:07
Hi everybody, Chris here from QSC,
00:10
in this video we’re going to show you how to navigate the user interface panel on a K.2 speaker.
00:15
The K.2 Series offers a new user interface experience.
00:19
Channel A has the ability to select between Line or Mic Level input.
00:24
Channel B can be Line or Hi-Z instrument level input for a passive pickup system.
00:29
The PRESET section gives the ability to select one of eleven different presets based on your application.
00:35
Everything from LIVE presets to application presets all the way to a studio monitor preset for studio mixing.
00:41
An adjustable crossover allows you to select a crossover frequency that matches the subwoofer that you’re using with your PA system.
00:48
Up to 100 milliseconds of delay time can be added to the box.
00:52
And a Four band parametric EQ can be adjusted to tailor the sound the way that you would like.
00:57
And in the settings section you can save it all as a SCENE and recall it later once you dial it all in.
01:02
With your independent gain controls for each channel,
01:05
you’ll see we have a third input with an 1/8th inch stereo jack, so that now you can plug in your phone or personal music player device.
01:15
Channels A and B have either an XLR or balanced ¼” input.
01:21
The XLR outs directly underneath are parallel line-level outputs pregain outputs
01:25
that can be taken out to a mixer, or daisy-chained to another speaker without affecting the signal.
01:30
And then the MIX OUT is the post gain mixed output of all three channels summed together.
01:36
Now that you know how the user interface works on the K.2 speaker,
01:39
you can connect, adjust, and tailor your sound to be just the way you want it.
Downloads and Links
K.2: Back Panel Navigation
1m 52s
Click here to download the "K.2: Back Panel Navigation" video
Visit the K.2 Series Active Loudspeakers product page!