L Class line array pole mount deployment training

L Class Training Series : Pole Mount Deployment

1 ) Introduction to L Class

5m 47s

2 ) LA108/LA112 User Interface

5m 27s

3 ) RapidDeploy™

5m 18s

4 ) Array Frame Deployment

5m 24s

5 ) Ground Stack Deployment

6m 18s

6 ) Pole Mount Deployment

2m 8s

7 ) AWARE™

7m 6s

8 ) System Navigator (SysNav) App: Connecting to the system

4m 16s

9 ) SysNav App: Controlling and monitoring an L Class system

4m 36s

10 ) SysNav App: Using the AIM module

10m 30s

11 ) L Class Assessment

Lesson Description

L Class line array pole mount deployment training 2m 8s

In this video, we show you how to deploy a smaller number of LA108 and LA112 loudspeakers on a loudspeaker stand or on an extension pole above a subwoofer

Lesson transcript

L Class line array pole mount deployment training 2m 8s
0:7
Hello and welcome back!
0:09
Today we’re taking a look at deploying an L Class line array onto speaker stand,
0:13
or on a pole over a subwoofer.
0:15
Let’s go. 
0:20
To begin, the LA112 can be quickly deployed in single, or two box array on a speaker stand
0:26
and LA108 can have up to three boxes stacked, due to its more compact size.
0:31
Each model is equipped with a 0 degree and 7.5 degree down-tilt pole cup receiver. 
0:36
In a single box deployment on the ground, the 0 angle should be used.
0:40
If deployed on stage or at an elevation, the 7.5 degree down-tilt should be used.
0:48
Additionally, if adding a second box, it’s best to then use the 7.5 degree down tilt
0:53
and set your angle between the two boxes to 12 degrees, for best coverage and performance in this configuration. 
0:59
If you are using the LA108 and want to add a third box to the stack,  
1:03
we’re going to continue to use the 7.5 degree down tilt pole cup.
1:06
From there just be sure to observe the progressive splay angle rule when setting the angles between the first and second loudspeaker  
1:12
and second and third loudspeaker,
1:13
never using a larger angle value above a smaller angle value. 
1:21
Utilizing the same pole cups,
1:23
these loudspeakers can also be deployed in the same configurations  
1:26
over the LA118 subwoofer using an extension pole.
1:30
That’s one or two boxes each for the LA112 
1:33
and up to three boxes with the LA108s.  
1:36
Additionally, when mounting the LA112 loudspeakers above the LA118 subwoofer,
1:40
the sub must be turned and used on its side.
1:43
This adds stability needed to safely support the larger LA112 loudspeakers  
1:47
while making the stack more aesthetically pleasing since the sub’s width now matches the LA112
1:54
And that's it!
1:55
We'll see you in the next video.