Using a K.2 loudspeaker as a floor monitor

K.2 Series Training : Floor Monitor Setting

1 ) K.2 Series Introduction

1m 37s

2 ) Back Panel Navigation

1m 53s

3 ) Floor Monitor Setting

1m 32s

4 ) Pairing a K.2 With A Subwoofer

1m 35s

5 ) K.2 as an Instrument Amplifer

1m 48s

6 ) K.2 for Acoustic Guitar and Vocals

1m 24s

7 ) K.2 Dance Preset

1m 13s

8 ) Directivity Matched Transition (DMT)

1m 19s

9 ) Power Efficiency

1m 8s

10 ) K.2 Final assessment

lesson descritpion

Using a K.2 loudspeaker as a floor monitor 1m 32s

Learn how to use the floor monitor setting on a K.2 series loudspeaker. 

Video Transcript

Using a K.2 loudspeaker as a floor monitor 1m 32s
0:07
Hi everybody, this is Chris from QSC here
0:10
today to talk to you about how to use your K.2 speakers as live stage monitors
0:15
We've got our full band setup and ready to go
0:17
But we have a couple of factory preset options we're gonna look at
0:19
so you make sure to get the right preset choice for your particular setup. Let's check it out
0:25
In this configuration, we’re going to use our K8.2 as our front vocal monitor
0:29
we're going to select our Stage Monitor 1 preset in here, which is optimized for use with a vocal microphone
0:35
We do that by using our enter button to select "Preset". Scroll down to Stage Monitor 1.
0:40
Select it, and then we can back out with the exit button
0:43
Now our K8.2 is optimized for use with vocals
0:48
For our drums and our keyboard monitors, we're going to use the Stage Monitor 2 preset
0:53
which is optimized for instruments that need a little more low end extension on their monitor mix
0:58
So now that we have the correct stage monitor preset selected for each member of the band
1:02
our on-stage system is stable and less prone to feedback
1:07
and we didn't have to use any external EQ or mixer EQ to get his kind of sound
1:11
So now that they're all up and running, we can let em roll!

Links

Using a K.2 loudspeaker as a floor monitor 1m 32s