lesson descritpion
Using a K.2 loudspeaker as a floor monitor
1m 32s
Learn how to use the floor monitor setting on a K.2 series loudspeaker.
Video Transcript
Using a K.2 loudspeaker as a floor monitor
1m 32s
0:07
Hi everybody, this is Chris from QSC here
0:10
today to talk to you about how to use your K.2 speakers as live stage monitors
0:15
We've got our full band setup and ready to go
0:17
But we have a couple of factory preset options we're gonna look at
0:19
so you make sure to get the right preset choice for your particular setup. Let's check it out
0:25
In this configuration, we’re going to use our K8.2 as our front vocal monitor
0:29
we're going to select our Stage Monitor 1 preset in here, which is optimized for use with a vocal microphone
0:35
We do that by using our enter button to select "Preset". Scroll down to Stage Monitor 1.
0:40
Select it, and then we can back out with the exit button
0:43
Now our K8.2 is optimized for use with vocals
0:48
For our drums and our keyboard monitors, we're going to use the Stage Monitor 2 preset
0:53
which is optimized for instruments that need a little more low end extension on their monitor mix
0:58
So now that we have the correct stage monitor preset selected for each member of the band
1:02
our on-stage system is stable and less prone to feedback
1:07
and we didn't have to use any external EQ or mixer EQ to get his kind of sound
1:11
So now that they're all up and running, we can let em roll!
Links
Using a K.2 loudspeaker as a floor monitor
1m 32s