You're almost ready for class!

View

As your final portion of the online training you are required to build a very simple design file. This file will be your starting point with the software in class, so you'll need to bring it with you.

Step 1

Here's what you should have in your design file:

An Audio Player with a Track Count of 2
A Matrix Mixer with 1 stereo input and 1 mono output
A Parametric Equalizer
A True Peak/RMS Meter

Step 2

Wire the design to meet the following criteria:

Use the Matrix Mixer to sum the channels of the Audio Player.
Wire the output of the Mixer into the Parametric Equalizer.
Send the output of the Parametric Equalizer to the True Peak/RMS Meter.
Place the True Peak/RMS Meter on it's own schematic page.
Use at least two of the three different types or wiring to connect all of the components.

Step 3

Add the following inventory items:

1 x TSC-7 Touchscreen Control Panel (Found under peripherals)

Once this is done, save the file and bring it with you to class!

Congratulations! You're half way to certification status!

Last modified: Monday, 20 June 2016, 11:15 AM