Building upon lessons learned in Q-SYS Training Control 101, this Q-SYS classroom course applies control concepts to common third-party devices. Each student will work on dedicated Q-SYS Core processors and control peripherals, as well as custom-made emulators designed specifically for this control class.

Choose from the schedule of classes below or request a local training in your area.


Highlights

  • Control common third-party AV devices with Q-SYS Control
  • Manipulate return strings
  • Build custom arrays & timers
  • Perfect for integrators and DSP experts looking to branch into control

Class Details

  • Prerequisites: Q-SYS Control 101 Training Certification
  • Length: Approximately 12 hours
  • Cost: Free!

Lightbulb

AVIXA CTS Credits

  • 4 units (upon successful completion of final assessment)

Not ready for Control training yet?

Start with the basics by taking Q-SYS Level 1 & Level 2 Training.

Upcoming and Ongoing Classroom Sessions

Control 201 UAE

Q-SYS Control 201: In-Classroom - UAE DATE:October 29th- 30th, 2024 TIME:09:30am - 05:30pm TIMEZONE:Gulf Standard Time LENGTH:One Day LOCATION:Q-SYS MEA Experience Center
ADDRESS:Umm Hurair 2, Dubai Supreme Court Complex, Office 409, Dubai UAE
Session Full

0 Seats Left

dk 201

Q-SYS Control 201: In-Class - Denmark DATE:October 29th- 30th, 2024 TIME:09:30am - 04:00pm TIMEZONE:Central European Time LENGTH:1 1/2 Days LOCATION:Kinovox Sjælland
ADDRESS:Marielundvej 45B, 2730 Herlev, Copenhagen
Reserve

1 Seats Left


Q-SYS Control 201 Training DATE:October 31st- November 1st, 2024 TIME:09:00am - 12:00pm TIMEZONE:Central Standard Time LENGTH:One and a half days LOCATION:Austin Experience Center
ADDRESS:3445 Executive Center Drive, Suite 151, Austin, TX 78731
Reserve

2 Seats Left

201SG

Q-SYS Control 201 DATE:November 5th, 2024 TIME:09:00am - 05:00pm TIMEZONE:Singapore Time LENGTH:1 Day, 0900 - 1700 LOCATION:Singapore Experience Centre
ADDRESS:Level 5 - Capital Square 23 Church St, Singapore 049481
Reserve

3 Seats Left


Q-SYS Control 201: In-Classroom, Eastern & Southern Europ DATE:November 5th- 6th, 2024 TIME:10:30am - 05:30pm TIMEZONE:Eastern European Time LENGTH:Two Days LOCATION:Q-SYS UK Training Centre
ADDRESS:Q-SYS House, Thorpe Lea Rd, Egham TW20 8BF


Q-SYS Control 201 Training: Online - U.S. DATE:November 5th- 7th, 2024 TIME:08:00am - 12:00pm TIMEZONE:Pacific Standard Time LENGTH:3 days (4 hours per day) LOCATION:Online via Zoom (Time Zone: PST)
ADDRESS:Webinar (Presented in English)
Session Full


Q-SYS Control 201: In-Class DATE:November 7th- 8th, 2024 TIME:09:00am - 03:30pm TIMEZONE:Central European Time LENGTH:1 1/2 Days LOCATION:Norway - Benum
ADDRESS:Benum Norway Østre Aker vei 68, 0581 Oslo
Reserve

1 Seats Left


Q-SYS Control 201 Training: Online - U.S. DATE:November 12th- 14th, 2024 TIME:08:00am - 12:00pm TIMEZONE:Pacific Standard Time LENGTH:3 days (4 hours per day) LOCATION:Online via Zoom (Time Zone: PST)
ADDRESS:Webinar (Presented in English)
Join Waitlist

0 Seats Left


Q-SYS Control 201: In-Class DATE:November 13th- 14th, 2024 TIME:09:30am - 04:00pm TIMEZONE:Greenwich Mean Time LENGTH:1 1/2 Days LOCATION:Q-SYS UK Training Centre
ADDRESS:Marine House, Thorpe Lea Rd, Egham TW20 8BF
Reserve

4 Seats Left

201ph

Q-SYS Control 201 DATE:November 13th, 2024 TIME:09:00am - 05:00pm TIMEZONE:Hawaii-Aleutian Standard Time LENGTH:1 Day 0900 - 1700 LOCATION:Qorsys AV Technologies
ADDRESS:Unit G10, Ortigas Technopoint Bldg CW Home Depot Compound, #1 Doña Julia Vargas Ave, Pasig, 1604 Metro Manila
Reserve

2 Seats Left


Q-SYS Control 201 Training: Online - Canada DATE:November 20th- 22nd, 2024 TIME:12:30pm - 04:30pm TIMEZONE:Eastern Standard Time LENGTH:Three Days - Four Hours Each Day LOCATION:Online via Zoom - For Canada Only
ADDRESS:Webinar (Presented in English)
Reserve

5 Seats Left


Q-SYS Control 201: Hybrid, On-Site and Online - Germany DATE:November 27th- 28th, 2024 TIME:09:30am - 05:00pm TIMEZONE:Central European Time LENGTH:Two Days LOCATION:Hybrid: On-Site and Online via Microsoft Teams (Time Zone: GMT +1)
ADDRESS:QSC EMEA, Am Ilvesbach 6, 74889 Sinsheim
Join Waitlist

0 Seats Left


Q-SYS Control 201 Training: Online - U.S. DATE:December 3rd- 5th, 2024 TIME:09:00am - 01:00pm TIMEZONE:Central Daylight Time LENGTH:3 days (4 hours per day) LOCATION:Online via Zoom (Time Zone: CDT)
ADDRESS:Webinar (Presented in English)
Join Waitlist

0 Seats Left


Q-SYS Control 201 Training: Online - U.S. DATE:December 3rd- 5th, 2024 TIME:08:00am - 12:00pm TIMEZONE:Pacific Standard Time LENGTH:3 days (4 hours per day) LOCATION:Online via Zoom (Time Zone: PST)
ADDRESS:Webinar (Presented in English)
Join Waitlist

0 Seats Left

logo q-sys control 201 training

Q-SYS Control 201: Paris DATE:December 5th, 2024 TIME:09:00am - 06:00pm TIMEZONE:Central European Time LENGTH:One Day LOCATION:Algam Offices - 20 rue Bouvier 75011 Paris
ADDRESS:Pour les participants Français, les inscriptions sont ouvertes directement sur le site Algam Enterprises


Q-SYS Control 201 Training: Online - U.S. DATE:December 17th- 19th, 2024 TIME:08:00am - 12:00pm TIMEZONE:Pacific Standard Time LENGTH:3 days (4 hours per day) LOCATION:Online via Zoom (Time Zone: PST)
ADDRESS:Webinar (Presented in English)
Join Waitlist

0 Seats Left

Control 201 UAE

Q-SYS Control 201: In-Classroom - UAE DATE:December 18th- 19th, 2024 TIME:09:30am - 05:30pm TIMEZONE:Gulf Standard Time LENGTH:One Day LOCATION:Q-SYS MEA Experience Center
ADDRESS:Umm Hurair 2, Dubai Supreme Court Complex, Office 409, Dubai UAE
Session Full

0 Seats Left

Logo Q-SYS COntrol 201 Training

Q-SYS Control 201: Paris DATE:January 30th, 2025 TIME:09:00am - 06:00pm TIMEZONE:Central European Time LENGTH:One Day LOCATION:Algam Offices - 20 rue Bouvier 75011 Paris
ADDRESS:Pour les participants Français, les inscriptions sont ouvertes directement sur le site Algam Enterprises

Logo Q-SYS COntrol 201 Training

Q-SYS Control 201: Paris DATE:February 13th, 2025 TIME:09:00am - 06:00pm TIMEZONE:Central European Time LENGTH:One Day LOCATION:Algam Offices - 20 rue Bouvier 75011 Paris
ADDRESS:Pour les participants Français, les inscriptions sont ouvertes directement sur le site Algam Enterprises

Logo Q-SYS COntrol 201 Training

Q-SYS Control 201: Paris DATE:March 13th, 2025 TIME:09:00am - 06:00pm TIMEZONE:Central European Time LENGTH:One Day LOCATION:Algam Offices - 20 rue Bouvier 75011 Paris
ADDRESS:Pour les participants Français, les inscriptions sont ouvertes directement sur le site Algam Enterprises

Logo Q-SYS COntrol 201 Training

Q-SYS Control 201: Paris DATE:March 27th, 2025 TIME:09:00am - 06:00pm TIMEZONE:Central European Time LENGTH:One Day LOCATION:Algam Offices - 20 rue Bouvier 75011 Paris
ADDRESS:Pour les participants Français, les inscriptions sont ouvertes directement sur le site Algam Enterprises

Logo Q-SYS COntrol 201 Training

Q-SYS Control 201: Paris DATE:April 24th, 2025 TIME:09:00am - 06:00pm TIMEZONE:Central European Time LENGTH:One Day LOCATION:Algam Offices - 20 rue Bouvier 75011 Paris
ADDRESS:Pour les participants Français, les inscriptions sont ouvertes directement sur le site Algam Enterprises

Logo Q-SYS COntrol 201 Training

Q-SYS Control 201: Paris DATE:May 22nd, 2025 TIME:09:00am - 06:00pm TIMEZONE:Central European Time LENGTH:One Day LOCATION:Algam Offices - 20 rue Bouvier 75011 Paris
ADDRESS:Pour les participants Français, les inscriptions sont ouvertes directement sur le site Algam Enterprises

Logo Q-SYS Control 201 Training

Q-SYS Control 201: Paris DATE:June 19th, 2025 TIME:09:00am - 06:00pm TIMEZONE:Central European Time LENGTH:One Day LOCATION:Algam Offices - 20 rue Bouvier 75011 Paris
ADDRESS:Pour les participants Français, les inscriptions sont ouvertes directement sur le site Algam Enterprises

Logo Q-SYS Control 201 Training

Q-SYS Control 201: Paris DATE:July 15th, 2025 TIME:09:00am - 06:00pm TIMEZONE:Central European Time LENGTH:One Day LOCATION:Algam Offices - 20 rue Bouvier 75011 Paris
ADDRESS:Pour les participants Français, les inscriptions sont ouvertes directement sur le site Algam Enterprises

Submit a Local Training Request


Don't see a training session that's right for you?Submit a Training Request form to notify your regional Q-SYS distributor that you would be interested in attending a local class.