UCI Creation and Management

Video Transcript

0:08
The Q-SYS User Control Interface, or UCI for short, provides the means for the end user to
0:13
control parts of the Q-SYS design through a networked device like a Q-SYS Touch Screen controller,
0:20
a Windows-based PC, an iPhone, iPad, you name it.
0:23
The choice is yours as to how much or how little you'd like the user to be able to control the system,
0:28
and the amount of creativity you put into designing your UCI can really go a long way.
0:33
In this design we’ll go through the basic steps of creating, editing, and deploying a UCI,
0:39
and along the way you’ll see some pretty cool UCIs that have been designed by actual Q-SYS users
0:45
Your first step is to go to the User Control Interfaces panel in the Left-Side Pane.
0:50
By default there is a UCI here titled Inventory Status, and if you just started your design
0:58
there should be one page called Default Location. You cannot remove, rename,
1:02
or edit this UCI, which will automatically be populated with the status bars of the items in your inventory,
1:09
like this Core status, right here. If you customize the name of your location of your inventory items,
1:14
then this UCI page will change from Default Location to the name you have supplied.
1:19
For instance if I were to go over here and change this to "front of house"
1:25
and go back to my UCI Control, there it’s already changed.
1:30
To create your own, customized UCI, click the Plus icon in the UCI panel
1:36
and select New User Control Interface. And now you now have a new blank UCI with one Page in it.
1:43
If you click the Plus icon again now, you’ll have a new option to add a Page to Interface 1,
1:49
and that will give you a 2nd page on your UCI.
1:53
Now you'll notice that navigation tabs have appeared on your UCI.
1:57
By default these tabs automatically show-up on the left-hand side, but if you select your UCI
2:05
and you come over here to Page Tabs you can change the position of that.
2:10
You can put it at the bottom, at the right, at the top, I’m going to put them back to the left.
2:16
You also can adjust the Font Size in your UCI, let's go ahead and bring this back up to 20 maybe. The last option for Page Tabs is called None.
2:25
If you select None, the tabs will disappear,
2:29
but you still probably want your user to be able to move from screen to screen.
2:34
There are a few ways to accomplish this.
2:37
You could simply drag a Page icon from the UCI panel into the UCI,
2:44
which will create a button that you can customize the appearance of.
2:48
The other way is for touchscreens only and that you can do just by swiping between pages,
2:52
like you would on any iOS device. This function is available on the QSC TSC-8, iPhone, and iPad.
3:01
Let’s look at the other options in the Properties panel. You can change your UCI’s title,
3:10
you can disable the swipe option for touchscreens, and here is where you select the Panel Type.
3:16
Now this is where you will decide what the size of your UCI is.
3:21
You can see that when you change your selection the dimensions of the UCI page
3:25
are automatically adjusted to the appropriate size of your device.
3:29
Because of this, it’s important that you select your Panel Type
3:32
and Page Tab orientation before adding content to your UCI,
3:36
or else your content may end up outside the visible area.
3:44
Other Panel Types include Generic 4:3 ratio, 16:9 ratio, and 16:10 ratio, iPad, iPhone, TSC-3
3:52
and the TSC-8. There’s one other option, which is the Custom option which lets you choose
4:02
the diagonal size of your UCI and the vertical and horizontal resolution of your UCI.
4:07
For most panel types, you can also specify your orientation to be in Landscape or Portrait mode.
4:13
Finally, if you activate the Private field then this UCI will be hidden from iOS and Windows UCI viewers,
4:19
allowing them to only be viewed by the QSC Touchscreen controllers.
4:25
Each Page of the UCI has its own Properties panel, in which you can change its Title.
4:30
So we’ll call this one Audio Controls and you can also change the Fill color,
4:37
so let’s go ahead and change that to a nice black.
4:40
Note that if you change the title of the pages, these names will automatically populate on your Page Tabs,
4:46
but you will have to manually change any navigation buttons you’ve already created.
4:51
Let’s go ahead and do that. If you need to take a quick break, go for it, if not, go to the next section.