Hardware Peripherals
| Site: | QSC |
| Course: | Q-SYS Level 1 Hybrid |
| Book: | Hardware Peripherals |
| Printed by: | Guest user |
| Date: | Sunday, 24 November 2024, 1:29 AM |
Description
Video Transcript
0:08
By now, you should understand that the every system starts with the Q-SYS Core;
0:13
it handles all of the audio, video and control processing on your system.
0:17
But now were going to introduce you to all the different specialized network peripherals you can add,
0:23
depending on your application needs,
0:25
all of these peripherals send their data over the same standard Gigabit network
0:29
back and forth to the Core for processing.
0:32
The I/O Frame, as its name implies, provides additional audio inputs and outputs the system,
0:38
when you need more connections than are available on your Core.
0:42
The standard model of I/O Frame can house up to four specialized I/O Cards,
0:47
which bring analog and bridge network audio sources onto the Q-LAN network to be delivered to the Core.
0:53
After the Core processes the audio, it transports the audio to an appropriate output,
0:59
which might be a local connection or I/O Card on the Core itself, or another networked I/O device.
1:06
Regardless of where the audio leaves Q-SYS,
1:09
that audio is then converted back to analog and delivered to the amplifier.
1:14
Q-SYS I/O devices are intended to be physically located close to the signal source or destination.
1:20
The different types of I/O Cards will be covered later in this course.
1:24
There are also a few other types of I/O devices.
1:27
The I/O-8 Flex is a compact PoE channel expander that provides 8 channels of “flex” input or output,
1:34
which means that it can be configured in the software with single channel granularity
1:39
to be either a mic/line input or a line output. For example if you need all 8 channel to be inputs, no problem.
1:47
If you need 3 inputs and 5 outputs, easy peezy! You get the idea.
1:52
On top of that, it comes with great mounting hardware that allow for single unit racking,
1:58
pairing them up with an additional I/O-8 Flex, or if you’re doing a standard conference room,
2:03
you might want to mount one right next to one of our SPA Series amplifiers.
2:08
Or mount them outside the rack entirely, under the table or behind an LCD screen.
2:13
If you need even higher channel count density in your installation
2:17
or you have highly specialized I/O requirements,
2:20
certain Cores, like the Core510i for example, can be operated in “IO Frame Mode”
2:26
this mode offers the ability to integrate up to 128x128 audio channels via its 8 I/O Card slots.
2:35
Keep in mind that you’ll need another Q-SYS Core on the network to do the processing.
2:40
Similar to the I/O-8 Flex, the I/O-22 is a compact standalone I/O Box
2:46
that provides two mic/line inputs and two line outputs, is powered over Ethernet,
2:52
and also includes an 8.5 watt mono amplifier to drive a local monitor speaker. This device is compact in size
3:01
which allows for hideaway mounting locations such as under a desk or attached to a rack tray.
3:06
Next on our list of peripherals are the AV-to-USB bridging devices,
3:10
ideal for integrating soft codec applications like Skype for Business and WebEx
3:16
into modern conference room hardware.
3:19
These include the Q-SYS PTZ-IP Cameras, and the IO-USB Bridge.
3:24
Both conference cameras stream high quality video over the network
3:28
to be delivered to a PC via a Q-SYS USB Video Bridge,
3:33
typically through an IO-USB Bridge end point device, to a laptops on a table,
3:38
or directly from the Core 110f’s USB port for rack-mount PCs.
3:44
These devices also allow USB Audio Bridges, which deliver up to 16x16 channels of audio to a computer
3:52
on the same USB 2.0 cable as the video bridge.
3:56
This system is fully explored in another course in this training.
3:59
Next, the Q-SYS touch screen controllers offer fully customizable control of the system for your end user.
4:06
User control interfaces can be designed with simple drag-and-drop ease with Q-SYS Designer Software
4:12
all without any scripting required.
4:15
Best of all, there is no additional control hardware required to run these touchscreen controllers.
4:21
Like every other function on Q-SYS,
4:23
these are software applications that are driven by the powerful Q-SYS Core processor.
4:28
Choose from models that range in size, resolution and form, including wall mount and tabletop versions.
4:35
The TSC-7t also has a USB bridge which can accommodate 16x16 channels of
4:41
BYOD audio connectivity to those soft codecs applications.
4:45
If you want wireless control, you can configured your UCI to be displayed on any iOS device.
4:50
Just download a free app from the Apple app store
4:53
For those interested in the transportation installations,
4:56
we have rugged networked Page Station peripherals available.
4:59
Just like with our touchscreens, no additional processors are required to drive this sophisticated paging system.
5:05
Q-SYS page stations are available in desktop or wall-mount versions with,
5:10
different options for microphones and keypads.
5:12
The PS-X is an additional accessory that provides a secondary microphone,
5:17
for applications such as an airport gangway or rail platform.
5:20
When designing your system, every peripheral that is properly connected to the Gigabit network
5:26
will be discoverable in the Q-Sys Configurator.
5:29
In order to make a peripheral accessible in your design,
5:32
simply go to the Inventory pane, click the Plus Icon, select Peripherals, and add your device to your design.
5:42
For more information on how this process, check out our video on the Configurator Tool.