End-User Control

Video Transcript

00:07
Once the system is configured, it’s time to put the control in the hands of the end user.
00:12
There are two main ways that the end users can interact with the system –
00:16
– either through the physical wall-mounted MF-C controller,
00:19
or through the MP-Manage app installed on any smartphone.
00:23
First let’s look at the MP-MFC wallmount controllers.
00:27
These intuitive tactile controllers can be installed in any standard junction box,
00:32
and be used to make simple adjustments for gain and source across multiple zones,
00:37
as well as loading scenes.
00:38
They connect to the MFC port on the back of the MP-M Series mixer—
00:42
—and can be daisy chained to allow for up to four controllers on the same port.
00:47
This means you can have up to 8 MFC controllers on a single MP-M,
00:51
which you’ll see represented down the left side of your screen here on the MFC setup page.
00:56
You can access this page either from the Setup Wizard,
00:59
or by navigating to the Menu and selecting Controllers.
01:03
Begin by naming a controller.
01:06
Then you can choose single or multi-zone control and determine which zone or zones it will control.
01:12
Since you’ve already assigned the possible Sources for these Zones,
01:17
these options will automatically populate as choices in your MFC controller.
01:21
Simply press the center select button to see the list of possible sources,
01:25
scroll to your choice, and select it.
01:28
MFC controllers also have the ability to trigger preloaded scenes.
01:32
A scene is a saved configuration of your design, which you can configure in the Menu.
01:38
To allow the MFC to load a particular scene,
01:41
simply select that scene here from the list of all available scenes.
01:46
Any scene with a star icon next to it is recallable on the MFC, while the others are not.
01:53
To recall a scene, double-tap the Select button on the controller, and then select the scene.
01:59
Now that you’ve defined what the MFC can do, you can pair a physical MFC with the MP-M.
02:06
Pairing an MFC controller with the MP Series Mixer couldn’t be simpler.
02:10
Just select any available controller and then select the Pair button.
02:15
Every connected MFC in the system will display a notice that it is now in pairing mode.
02:20
Then simply walk to that controller and press any button.
02:24
The physical MFC controller will be paired with its representation in the MP-Install app.
02:30
Do that with each of your devices, and that’s it!
02:33
And that’s pretty much all there is to the MFCs – they’re simple to setup, and simple to use.
02:38
For more advanced end user control,
02:40
you may want to setup Smartphone controls for the end users who are using the MP Manage app.
02:45
You can access this page either from the Setup Wizard, or by going to Menu > Smartphone.
02:51
The major control difference between the wall controller and the smartphone
02:55
is the ability to set up different user profiles and assign different privileges to each user type.
03:01
You can create eight different users, simply by selecting one and giving it a name.
03:07
Then decide which zones that user level should have access to control.
03:11
So pick as many as make sense for this user.
03:14
You then have a second column of other types of controls
03:17
that you can choose to engage or disengage for each user.
03:21
You can allow a user to access the Wi-Fi Paging, the Scheduler,
03:25
the ability to Recall and Save Scenes, Lock certain Zones, or to control the Mixer or USB Player.
03:32
Be sure to press the Save button for this user before you move on to the next one!
03:36
And you'll notice that the first user on the list always has Security options available,
03:41
but you can elect whether or not other users have access to this.
03:45
When your user installs the MP Manage App,
03:48
be sure they connect to the same wireless network as your MP-M device,
03:52
and they will receive a notification that they have connected, but have not yet been assigned access.
03:58
On your manager device, you’ll see a popup that a new device has connected.
04:02
You can then access the Password page on that smartphone
04:05
and use your Manager access to unlock the new device,
04:09
and then select a user profile to link to that particular smartphone,
04:13
giving them the appropriate access.
04:15
In another video we’ll go through end user functionality of the MP-Manage app
04:19
just in case your end users forget how to use it,
04:21
but you should definitely spend some time reviewing these controls
04:25
with your end user before you complete your commissioning.
04:28
Since you’ll already be well versed on the MP Install by this point in the installation,
04:32
it should be fairly intuitive to you.
04:34
It gives you access to different areas of configuration,
04:37
but the interface is in a different configuration that fits a smartphone.
04:41
If you’ve been progressing forward with the Setup Wizard, you’re almost all done!
04:46
Check your Wall Controllers and Smartphones tasks off the list,
04:49
and you now have a fully functional system.
04:51
All that’s left is to enter your Job Information and generate a Report.
04:57
This will compile all of the system’s settings into a single text file which you can use for reference later.
05:03
However, just because you’re done setting up the Wizard doesn’t mean you’ve fully mastered this system.
05:09
There are still a few features we haven’t explored on the MP Series,
05:12
such as the Mixer, Scenes, GPI Setup, and the USB Player, which we’ll cover in upcoming videos.
05:19
Until then, we'll see you next time!